The alarm system adopts SMS data transmission and voice platform of GSM network to send control command and receive alarm remotely. When a signal is detected by detectors, the detectors will send alarm signal to system immediately. The system then sends alarm SMS to its pre-set mobile phone numbers, and meanwhile dials the pre-set telephone/mobile phone numbers automatically. In addition, you can set the system in arm/disarm mode using remote phones.
Name: GSM Home Alarm System-G40
Supprot Contact ID Communication protocol
Preset 5 Telephone & SMS number
Main Features:
Integrated with GSM cellular module
Concise and elegant plastic house with simple operating interface
Contact ID communication protocol
LCD screen with calender,GSM signal level
With 30 wireless alarm zones, GSM SMS alert and Telephone alarm
One-key arm operation, coding wireless sensors
Can preset 5 groups telephone, SMS numbers, with functions of recording, voice indicating and monitoring
With three arm function: Home Arm, Away Arm, Delay Arm.
Alarming Priority, log function, built-in back-up battery, AC/DC power both available
5 Arm/Disarm ways: Remote Controller, Host Keypad , Remote Controlling Keypad(options) , Telephone/Mobile phone and SMS
Outer power off inform via SMS
Internal & external antenna for your options
Standard Package:
Alarm system (control unit) – 1 pc.
Wireless PIR detector – 1 pc.
Wireless door (gap) sensor – 1 pc.
Remote controller– 2 pcs.
Antenna – 1pc.
Wireless Sound&flash 110dB/0.3m – 1 pc.
Power adpater – 1pc.
http://www.burglaryalarmsystem.com » |
|
It is NOT ok to contact this poster with commercial interests.
|
Other Categories
